21
SETTINGS
Continued on the next page
Category Menu items
Selectable settings, [reference page]
TUNER
MONO
*
3
Monaural mode
•
MONO ON
•
MONO OFF
: Activate monaural mode to improve FM reception, but stereo
effect will be lost, [8].
: Restore the stereo effect.
IF BAND
Intermediate
frequency band
•
AUTO
•
WIDE
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
COLOR
COLOR 01
– COLOR 29,
USER
: Select one of the preset or user color for display and button (except
EQ
/
/
0
) illumination.
(See also page 23 for USER color setting.)
MENU
COLOR
MENU COLOR
Menu color
•
OFF
•
ON
: Cancels.
: Changes the display and button (except
EQ
/
/
0
)
illumination during menu, list search and playback mode
operations.
RING COLOR
RING COLOR
*
4
Ring color
•
OFF
•
ON
: Cancels.
: When a call comes in, the display will flash in blue.
• The display will change to the original color when the call is
answered or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
AUDIO
FADER
*
5
Fader
R06 – F06
: Adjust the front and rear speaker output balance.
[Initial: 00]
BALANCE
*
6
Balance
L06 – R06
: Adjust the left and right speaker output balance.
[Initial: 00]
LOUD
Loudness
•
LOUD OFF
•
LOUD ON
: Cancels.
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
VOL ADJUST
Volume adjust
VOL ADJ –05
—
VOL ADJ +05
[Initial:
VOL ADJ 00]
: Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level will
automatically increase or decrease when you change the source.
• Before making an adjustment, select the source you want to
adjust.
• “VOL ADJ FIX” appears on the display if “FM” is selected as the
source.
*
3
Displayed only when the source is “FM.”
*
4
Displayed only when Bluetooth adapter, KS-BTA200 is connected.
*
5
If you are using a two-speaker system, set the fader level to “00.”
*
6
This adjustment will not affect the subwoofer output.
EN16-21_KD-R404[UI]_1.indd 21
EN16-21_KD-R404[UI]_1.indd 21
8/9/08 12:04:53 PM
8/9/08 12:04:53 PM