ENGLISH
31
REFERENCES
Symptoms
Remedies/Causes
MP3/WMA playback
• Noise is generated.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is required
(“READING” keeps flashing on the display).
Do not use too many hierarchical levels and folders.
• Tracks do not play back in the order you
have intended them to play.
The playback order is determined when the files are
recorded.
• The elapsed playing time is not correct.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
• The correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Bluetooth *
• Bluetooth device does not detect the unit.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• The unit does not detect the Bluetooth
device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (See page 11.)
• The unit does not make pairing with the
Bluetooth device.
• Enter the same PIN code for both the unit and target
device.
• Select the device name from “SPECIAL,” then try to
connect again. (See page 11.)
• Try to pair/connect from the Bluetooth device.
• Echo or noise occurs.
Adjust the microphone unit position.
• Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to a place where you can get a better
signal reception.
*
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Continued on the next page
EN30-37_KD-S26[J]f.indd 31
EN30-37_KD-S26[J]f.indd 31
6/11/09 3:15:45 PM
6/11/09 3:15:45 PM