Filename [MX1SEU_10Timer Recording.fm]
Masterpage:Left0
54
EN
Page 54Monday, 6 December 2004 14:01
TIMER RECORDING ON VHS DECK
You can programme this unit to timer-record as many as 8
programmes.
With the
a
system, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your unit is able to recognise.
You can use the remote control to enter the
a
number.
1
Load a cassette with the record safety tab intact.
2
Press
VHS
so that the VHS lamp lights up on the unit.
3
Press
PROGRAMME
to access
the Programme screen.
4
Press
F G
to select
A
SHOWVIEW PRGM
B
, then
press
ENTER
.
5
Press the
number keys
to enter
the
a
number of a
programme you wish to record,
then press
ENTER
.
●
If you have made a mistake,
press
CANCEL
and input the
correct number before you press
ENTER
.
●
If the number you entered is
invalid,
A
ERROR
B
appears on the TV screen and
A
Err
B
appears
on the front display panel.
Press
CANCEL
and input a valid
a
number.
6
The
a
number you
entered and the matching timer-
recording information are
displayed on the TV screen.
Check the programme data.
●
To cancel this setting, press
PROGRAMME
.
7
Press
REC MODE
to select the desired recording mode. Or
press
D E
to select
A
SP/LP
B
, then press
F G
to select the
desired recording mode.
8
Press
D E
to select
A
VPS/PDC
B
, then press
F G
to select the
desired channel.
9
Press
ENTER
to complete timer programming.
●
To programme another timer, repeat steps
3
–
9
.
●
If
A
PROGRAM OVERLAPPED
B
appears on the TV screen, see
page 56.
10
Press
VHS
j
to engage the unit’s timer mode. The VHS
recording lamp lights up on the unit and the HDD or DVD deck
is automatically selected. Press
A
to turn off the unit. When
the HDD or DVD deck is in timer standby mode, the unit is
automatically turned off.
●
The VHS timer indicator lights up on the front display panel
when the VHS deck is set to the timer recording standby
mode by pressing
VHS
j
. However, it will blink rapidly when
VHS
j
is pressed under the following conditions:
●
Clock is not set.
●
Timer programming has not been set.
●
Cassette is not loaded.
●
Timer recording standby mode with a cassette without record safety
tab inserted
●
To disengage the timer mode, press
VHS
j
again.
NOTES:
●
To Timer-Record Weekly Or Daily Serials:
^
in step
6
, press
number keys
A
9
B
for weekly serials or
number keys
A
8
B
for daily serials (Monday - Friday). Either
A
WEEKLY
B
or
A
DAILY
B
appears on the TV screen. Pressing the
button again makes the corresponding indication disappear.
●
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
A
PROGRAM FULL
B
appears on the TV screen and
A
FULL
B
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary programmes.
(
A
pg. 56)
●
To record the programmes received by satellite receiver, record
on the HDD or the DVD discs. For details, refer to
A
c
Timer
Programming
B
(
A
pg. 49)
b
Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
0-9
REC MODE
VHS
#
VHS
CANCEL
PROGRAMME
rtwe
ENTER
CABLE/SAT
DVD
TV
PROGRAMME
[
JK
]
N
[ENTER]
[PROGRAMME] : EXIT
N
SHOWVIEW PRGM
PROGRAMME/CONFIRM
[0-9]
N
[ENTER]
[
L
] : DELETE
[PROGRAMME] : EXIT
SHOWVIEW SYSTEM
CURSOR : [
HI
] SELECT : [
JK
]
CONFIRM : [ENTER]
DATE
START
DAILY/WEEKLY
TV PROG
STOP
SP/LP
SP
ARD
VPS/PDC
OFF
MON-FRI
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see
A
c
System Setup
B
(
A
pg. 83) and
set the Guide Programme number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s programme number has been changed, the wrong
programme number will be displayed on the
a
programme screen in step
6
. When this happens, set the correct
Guide Programme number for that station. (
A
pg. 83,
A
c
System Setup
B
)
MX1SEU_00.book Page 54 Monday, December 6, 2004 2:01 PM
