19
2 Preparation
Example:
Proceed as follows to prepare milk foam.
T
Remove the protective cover from the cappuccino frother.
T
Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for a milk container.
T
Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T
Place a cup under the cappuccino frother.
T
Turn the setting wheel of the cappuccino frother to the Milk
Foam position
ü
.
E
If you want to
heat the milk
turn the setting wheel of the cap-
puccino frother to the Milk position
z
.
T
Press the
‘1 portion milk’
button.
‘1 portion milk’
As soon as the machine has heated up,
‘Please select pro-
duct:’
appears.
T
Press the
‘1 portion milk’
button again.
‘1 portion milk’
, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk is reached.
‘Please select product:’
appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cap-
puccino frother’).
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filler funnel for ground coffee.
E
Never add more than two level measuring spoons of ground
coffee.
E
Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E
If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee’
is displayed and
the IMPRESSA stops the operation.
Warm milk and milk
foam
Ground coffee
