26
4 Permanent settings in programming mode
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
T
Press the
‘Volume’
button.
T
Press the
‘ < ’
or
‘ > ’
button to change setting for the fill vol-
ume to
‘40 ml’
.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
T
Press the
‘Next’
button.
T
Press the
‘Interval’
button.
T
Press the
‘ < ’
or
‘ > ’
button to change setting for the interval
to
‘40 sec.’
.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Latte macchiato’
O
T
Press the P button to exit programming mode.
‘Please select product:’
In the programme item
‘Maintenance settings (3/6)’
you can make
the following settings:
U
‘Filter’
U
Activate the CLARIS Blue filter cartridge (see Chapter 1 ‘Pre-
paring and using for the first time – Inserting and activating
the filter’).
U
‘Water hardness’
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 1 ‘Preparing and using for the
first time – Adjusting the water hardness’).
U
‘Rinse the coffee system’
/
‘Manual’
U
The switch-on rinse must be started manually.
U
‘Rinse the coffee system’
/
‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’
/
‘After 10 min.’
U
You are prompted to rinse the milk system 10 minutes after
preparation of a speciality coffee with milk.
U
‘Rinse the milk system’
/
‘Immediate’
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
Maintenance settings
