29
4 Permanent settings in programming mode
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example:
Proceed as follows to change the unit for the amount of
water from
‘ml’
to
‘oz’
.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/6)’
g
T
Turn the Rotary Switch until the programme item
‘Machine
settings 1 (4/6)’
is displayed.
T
Press the
‘Units’
button.
‘Units’
T
Press the
‘oz’
button.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Machine settings 1 (4/6)’
O
T
Press the P button to exit programming mode.
‘Please select product:’
In the programme item
‘Machine settings 1 (4/6)’
/
‘Factory setting’
you can reset various settings to their factory settings:
U
‘Machine’
U
All customer settings
(apart from the ‘filter’) are reset to
factory settings. Your IMPRESSA then switches off.
U
‘Products’
U
The settings (amount of water, aroma, temperature etc.) for
any product can be reset
individually
to the factory settings.
The corresponding double product is also reset to the fac-
tory settings at the same time.
U
‘All products’
U
The settings (amount of water, aroma, temperature etc.) for
all products
are reset to the factory settings.
U
‘Display’
U
All display settings are reset to the factory settings.
Example:
Proceed as follows to reset the values for
‘Espresso’
to the
factory settings.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/6)’
Unit for amount of water
Restore factory settings
