Introduction
Thank you for purchasing the IMPRESSA F50/F5. To ensure
perfect functioning of your IMPRESSA F50/F5, carefully read this
operating manual and keep it for future reference.
Should you need more information or if you encounter particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
1. Safety information
1.1 Warning
Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
The coffee machine may only be used by instructed persons.
Never use a defective coffee machine or a machine with a
defective mains cable.
Never immerse the coffee machine in water.
1.2 Precautions
Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Install the machine on a stable and level surface. Never place
your machine on hot or warm surfaces (cooktops). Make sure the
machine is installed at a place not accessible to children or pets.
If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
Always disconnect mains cable before cleaning the machine.
When disconnecting the mains cable never pull on the mains
cable or the machine itself.
Never repair or open the coffee machine yourself. Any repairs
may only be carried out by authorized service shops using ori-
ginal spare parts and accessories.
The coffee machine is connected to mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Make
sure children and pets cannot reach the machine
Never put the coffee machine or individual parts of it into a
dishwasher.
Make sure to install the machine at a place with sufficient air
circulation, to prevent overheating of the machine.
2. Preparing the IMPRESSA F50/F5
2.1 Check supply voltage
The IMPRESSA F50/F5 is preset in the factory to the correct
mains voltage. Check if your local mains supply voltage complies
with the information given on the type plate on the underside of the
IMPRESSA F50/F5.
2.2 Check electrical fuse
The IMPRESSA F50/F5 is designed for an electric current of 10
amperes. Check if the electrical fuse has sufficient capacity.
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Remove the water tank and rinse it with cold tap water
thoroughly (Fig. 4).
Then fill the water tank and reinstall it. Make sure to install the
tank properly, it must engage audibly.
6
