Jura IMPRESSA F5, Инструкция по эксплуатации

Страница: 15 / 24

15
15.4 Programming the temperature
READY
Press programming key (4) until
FILTER appears.
The illuminated ring (2) is active.
Turn the rotary switch (1) until Temperature is displayed.
TEMPERATURE
Press the rotary switch (1).
HIGH
Turn the rotary switch (1) to change the temperature from HIGH
to NORMAL (or vice versa).
NORMAL
To confirm the new settings, press the rotary switch (1).
TEMPERATURE
Press the programming key (4) to quit the programming
mode or select the next programming item using the rotary
switch (1).
READY
15.5 Programming the time
You must programme the time if you want to use the auto-
matic switch-on function.
READY
Press programming key (4) until
FILTER appears.
The illuminated ring (2) is active.
Turn the rotary switch (1) until TIME is displayed.
TIME
Now press the rotary switch (1) to start programming the time.
--:--
Turn the rotary switch (1) to adjust the hours..
12:--
Press the rotary switch (1) to confirm the hour settings and to
activate the minutes.
12:--
Turn the rotary switch (1) to select the minutes.
2:05
To confirm the new settings, press the rotary switch (1).
TIME
Press the programming key (4) to quit the programming
mode or select the next programming item using the rotary
switch (1).
READY
If the machine is disconnected from power supply, the time
must be programmed again.
15.6 Programming the automatic switch-on time
You must programme the time (Chapter 15.5) if you want to
use the automatic switch-on function.
READY
Press programming key (4) until
FILTER appears.
The illuminated ring (2) is active.
Turn the rotary switch (1) until MACHINE ON is displayed.
MACHINE ON
Now press the rotary switch (1) to start programming the switch-
on time.
E