10
7. Adjusting the water quantity for coffee
The indicated value in ML is a reference value and may
deviate from the actual value
If you press the draw-off key for 2 cups
(6) the water
quantity is doubled automatically.
You can change/stop the water quantity during the draw-off
operation, too. Turn the rotary switch (1) until the required
ML value is displayed.
You can adjust the water quantity in steps of 5 ML using the rotary
switch (1).
READY
Turn the rotary switch (1) until the required water quantity is
displayed.
For example,
120 ML
8. Drawing off 1 cup of coffee
You have the possibility of increasing the strength of the
coffee at any time in the grinding process by pressing the
1-cup draw-off key
again.
For Example: by pressing the 1-cup draw-off key
three
times you get strong coffee.
STRONG
You can choose among three strengths at the push of a but-
ton. The longer you press the draw-off key for 1 cup
(5),
the stronger your coffee will be (Display: MILD/ NORMAL/
STRONG).
You can adjust the water quantity before the draw-off opera-
tion using the rotary switch (1).
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
You can check the water quantity used for the last draw-off
operation by pressing the rotary switch (1).
READY
Put a cup under the adjustable coffee spout (17).
Press the draw-off key for 1 cup
(5) until the required
strength is displayed:
MILD
180 ML (water quantity last adjusted)
The illuminated ring (2) is active.
Turn the rotary switch (1) again to select the water quantity indi-
vidually:
For Example:
160 ML
For Example:
MILD
Your product is being prepared.
READY
9. Drawing off 2 cups of coffee
Selecting the coffee strength is not possible when drawing
off 2 cups of coffee. You will draw off 2 mild cups auto-
matically.
You can adjust the water quantity before the draw-off ope-
ration using the rotary switch (1). The adjusted value (ML)
refers to 1 cup.
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
You can check the water quantity used for the last draw-off
operation by pressing the rotary switch (1).
