25
4 Permanent settings in programming mode
Product
Coffee strength
Amount
More settings
Hot water
–
Water: 25 ml – 450 ml
Temperature (low, normal,
high)
E
In addition to the settings listed, you can
reset the values for
all products to the factory settings.
Example:
Proceed as follows in the
‘Expert mode’
to change the
amount of milk for a latte macchiato from
‘4 sec.’
to
‘6 sec.’
, the
amount of milk foam from
‘12 sec.’
to
‘14 sec.’
and the amount of
water from
‘45 ml’
to
‘40 ml’
.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/5)’
g
T
Turn the Rotary Switch until the programme item
‘Product
settings (2/5)’
is displayed.
T
Press the
‘Expert mode’
button.
‘Expert mode’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E
You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T
Press the
‘Latte macchiato’
button.
T
Press the
‘Amount of milk’
button.
T
Press the
‘+’
or
‘–’
button to change setting for the amount
of milk to
‘6 sec.’
.
T
Press the
‘Save’
button.
T
Press the
‘Amount of milk foam’
button.
T
Press the
‘+’
or
‘–’
button to change setting for the amount
of milk foam to
‘14 sec.’
.
T
Press the
‘Save’
button.
T
Press the
‘Volume’
button.
T
Press the
‘+’
or
‘–’
button to change setting for the fill vol-
ume to
‘40 ml’
.
T
Press the
‘Save’
button.
O
T
Press the P button to exit programming mode.
‘Please select product:’
