19
2 Preparation
T
Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’
appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’
appears on the display.
E
You can alter this setting at any time by repeating the above
procedure.
E
The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch
k
until
‘Enough coffee?
Press button.’
appears.
E
You can also permanently set the amount for all speciality cof-
fees, milk and hot water in programming mode (see Chapter 4
‘Permanent settings in programming mode – Product set-
tings’).
You have the option of configuring the start screen such that the
grinder selection (‘beans à la carte’) is always displayed. Before each
preparation, you can select which grinder is to be used and therefore
which coffee beans are to be used.
E
If the grinder selection is activated, you can no longer set the
grinder for the individual products in programming mode (in
the
‘Product settings (2/5)’
programme item).
Example:
Proceed as follows to activate ‘beans à la carte’ mode.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/5)’
g
T
Turn the Rotary Switch until the programme item
‘Machine
settings (4/5)’
is displayed.
T
Press the
‘Café à la carte’
button.
T
Press the
‘Active’
button.
T
Press the
‘Saved’
button.
‘Saved’
appears briefly on the display.
‘Machine settings (4/5)’
O
T
Press the P button to exit programming mode.
‘Please select product:’
Activating the grinder
selection
