14
1 Preparing and using for the first time
T
Place a receptacle under the dual spout.
k
T
Press the Rotary Switch.
‘Machine is rinsing.’
, the machine rinses. The operation
stops automatically.
‘Please select product:’
appears on the
display. Your GIGA is ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T
Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T
Wait for about 1 minute.
T
You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Your GIGA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4 – 8 °C. We would therefore recommend
using a milk cooler (e.g. the JURA Compressor Cooler Pro, which is
available as an option).
T
Connect the milk pipe to the dual spout. To do this, attach
the end of the milk pipe to the connector on the right-hand
side of the dual spout.
T
Connect the other end of the milk pipe to a milk cooler.
Determining the water
hardness
Connecting milk
