30
4 Permanent settings in programming mode
T
Touch
‘Back’
the number of times needed to display the start
screen again.
In the programme item
‘Machine settings’
/
‘Timer’
you can set a
switch-on and switch-off time for every weekday.
E
For the time format, you can choose between ‘24 hrs’ and
‘AM / PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Unit for amount of water / time format’).
Example:
Proceed as follows to set the GIGA to switch on on
Mon-
days
at a time defined by you.
Precondition:
The start screen is displayed.
T
Touch
‘ P ’
.
‘Maintenance status’
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
T
Press the Rotary Switch.
‘Switch off after’
T
Turn the Rotary Switch until
‘Timer’
is displayed.
T
Press the Rotary Switch.
‘Timer’
T
Touch
‘Monday’
.
‘Switch machine on’
T
Enter the desired switch-on time.
T
Touch
‘Save’
.
‘Switch machine off’
T
Touch
‘Back’
the number of times needed to display the start
screen again.
The harder the water is, the more frequently the GIGA needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
Precondition:
The start screen is displayed.
Timer
Setting the water
hardness