25
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Touch
‘ P ’
to enter programming mode. Move your finger across the
display or turn the Rotary Switch to navigate through the pro-
gramme items and permanently save the desired settings. The fol-
lowing settings can be made:
Programme item Sub-item
Explanation
‘Maintenance
status’
(
‘1/4’
)
‘Clean’
,
‘Change the filter’
(only
if filter is fitted),
‘Descale’
,
‘Clean the milk system’
,
‘Rinse’
,
‘Lock display’
,
‘Maintenance information’
T
Start
the required maintenance pro-
gramme here.
‘Machine settings’
(
‘2/4’
)
‘Switch off after’
T
Set the time after which the GIGA should
switch off automatically.
‘Time’
,
‘Date’
T
Set the time and date to use the timer
function on your GIGA.
‘Timer’
T
Specify a switch-on and switch-off time for
each weekday.
‘Set consistency of grind’
T
Adjust the consistency of grind to the
coffee beans used.
‘Save energy’
T
Activate energy-saving mode.
‘Lock/enable’
T
Disable different machine functions.
‘Factory setting’
T
Reset the machine to its factory setting.
‘Units’
T
Select the unit for the amount of water and
the time format.
‘Display’
T
Change the display brightness.
‘Water hardness’
T
You can set the water hardness of the water
used.
‘Choose language’
T
Select your language.
‘Connect accessory’
,
‘Disconnect accessories’
(Only displayed if the JURA
Smart Connect is being used.)
T
Connect the GIGA wirelessly to a JURA
accessory or disconnect the connection
again.