Juplink RX4-1800, Руководство пользователя

Страница: 46 / 65

46
8.10.3. IPv6 LAN IP Configuration
1) After logging in to your router, click Basics > LAN > IPv6 LAN IP Configuration .
2) Select your Addressing Type from drop-down list ( Stateless is the default setting).
After modify your Start IPv6 Address and End IPv6 Address , click Save to finish your
settings.
8.10.4. LAN prefix config
1) After logging in to your router, click Basics > LAN > LAN prefix config .
2) Turn on Enable Prefix static , and fill in Prefix setting.
It is recommended to keep Preferred LifeTime and Valid LifeTime as the default values.
3) Before setting, use the
ifconfig
command to view the IP address obtained in SSH and
write down the prefix.
For example, if you get
2001:250:ffff:8000:e6f4:feff:fe00:1122:3344/64 , the prefix is
2001:250:ffff:8000::/64 .
You can add any hexadecimal characters as your subnet address, for example
2001:250:ffff:8000:2333:dead:beef::/112 .
Note: Please remember your subnet prefix and prefix length, as you will use them from time
to time later.