Operation
SUPRAECO W – 6 720 646 161 (2012/04)
24
8.7
Factory configurations
Upon definition of the temperature units and timetable, the device will
operate according to the factory set values.
Heating mode: „Combi“ (
Æ
chapter 8.5.1)
Manual functioning: „manual“ (
Æ
chapter 8.3)
Fig. 43 Initial menu
8.8
Selecting the temperature units - „°C“ or „°F“
Upon the 1
st
use, the user must select the temperature unit.
Fig. 44 Selecting the temperature units
B
Press the „+“ or „-“ keys to select the temperature unit.
B
Confirm the selection using the „ok“ key.
8.9
Setting the time and day of the week
Fig. 45 Setting the time
B
Press the „+“ or „-“ keys to set the time.
B
Confirm the selection using the „ok“ key.
Display shows the minute digits, blinking.
B
Press „+“ or „-“ keys to set the minutes.
B
Confirm the selection using the „ok“ key.
The clock is set and the day of the week begins to blink.
Fig. 46 Setting the day of the week
B
Press the „+“ or „-“ keys to set the day of the week.
B
Confirm the selection using the „ok“ key.
The „am/pm“ selection is only valid if „°F“ is selected as
the unit of temperature.
6720646160-37.1V
6720646160-34.1V
6720646160-11.1V
By default, the first day of the week is Monday, the
second is Tuesday, and so on. The definition of the 1
st
day of the week can be changed if desired.
6720646160-12.1V
