Junker JC BC Series, Руководство пользователя

Страница: 48 / 104

en
Troubleshooting
48
Fault Cause Troubleshooting
The base of the refrigerator
compartment is wet. The condensation channel
or drainage hole are
blocked.
▶
"Clean the condensation channel
and the drainage hole."
→
Page 45
The temperature differs
greatly from the setting. Different causes are pos-
sible.
1.
"Switch off the appliance."
→ Page 40
2.
"Switch the appliance back on after
five minutes."
→
Page 39
‒
If the temperature is too
warm, check the temperature
again after a couple of hours.
‒
If the temperature is too cold,
check the temperature again
on the following day.
The appliance hums,
bubbles, buzzes, gargles or
clicks. Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan. Refrigerant flows
through the pipes. The mo-
tor, switches or solenoid
valves are switching on or
off. No action required.
The appliance makes
noises. Fittings wobble or stick.
▶
Check the removable fittings and, if
required, replace these.
Bottles or containers are
touching.
▶
Move the bottles or containers
away from each other.
Super function is switched
on. No action required.
The appliance has an un-
pleasant smell. Various causes are possible,
e. g. spoiled food or spilled li-
quids in the appliance.
1.
Dispose of all spoiled food.
2.
"Prepare the appliance for clean-
ing."
→
Page 44
3.
"Clean the appliance." → Page 45
4.
Clean all food packaging.
5.
To prevent odours from forming,
store strong smelling food in air-
tight containers.
6.
After 24 hours, check whether
odours are still forming.