Juniper SRX4100, Руководство по оборудованию

Страница: 117 / 134

CHAPTER 24
Electrical Safety Guidelines and Warnings
• General Electrical Safety Guidelines and Warnings on page 101
• AC Power Electrical Safety Guidelines on page 105
•
DC Power Electrical Safety Guidelines on page 107
•
In Case of an Electrical Accident on page 112
General Electrical Safety Guidelines and Warnings
Safety Guidelines and Warnings
•
Install the services gateway in compliance with the following local, national, or
international electrical codes:
• United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code
•
Canada—Canadian Electrical Code, Part 1, CSA C22.1
• Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7
•
Evaluated to the TN power system
•
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
• Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
• Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
•
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
• Operate the services gateway within marked electrical ratings and product usage
instructions.
•
For the services gateway and peripheral equipment to function safely and correctly,
use the cables and connectors specified for the attached peripheral equipment, and
make certain they are in good condition.
101 Copyright © 2017, Juniper Networks, Inc.