Juniper SRX100, Руководство по оборудованию

Страница: 30 / 154

Table 8: SRX100 Services Gateway Front Panel LEDs (continued)
Usage Description Component Number
The Status LED can be used
to determine whether the
device is starting up, is
functioning normally, or has
failed. The Status LED has the
following indicator colors:
■
Green and steadily on
indicates that the device
is functioning normally.
■
Amber and steadily on
indicates that the device
is starting up.
■
Red and steadily on
indicates that an error is
detected in the device.
Status LED 4
SRX100 Services Gateway Ethernet Port LEDs
On the SRX100 Services Gateway, each Fast Ethernet port has one functional LED
on the left side that indicates Link and Activity. In Figure 5 on page 12, this LED is
marked as 1.
Figure 5: SRX100 Services Gateway Ethernet Port LEDs
The below table applies only to LED marked 1. The states of this LED are as follows:
Table 9: SRX100 Services Gateway Built-In Ethernet Port LEDs
Description State Color Function
Link is active. Data communication is
taking place. Blinking Green TX/RX/LINK
Link is active. No data communication
is taking place. Steady
Link is inactive. Off Unlit
NOTE: The LED marked as 2 in the graphic is not functional in this release.
12 ■
SRX100 Services Gateway LEDs
SRX100 Services Gateway Hardware Guide