Juniper BT8A78CH1, Обзор оборудования и руководство по установке

Страница: 70 / 228

With the chassis still on the pallet, remove the plastic strapping from the box and lift
the box up, over and away from the chassis. Place the box out of the way, so that it
is not obstructing the area around the chassis, or obstructing the path to the chassis
rack. Before moving the chassis, refer to
“Lifting and Moving the BTI7814 Chassis” on
page 70 .
5.
Perform a visual inspection of all equipment to verify that it is not damaged from the
transport.
You have successfully completed this procedure.
Verify Shipment Contents
Refer to your bill of sale to verify which and how many components should be included
with your shipment. For details on the contents of the different chassis kits, see
“BTI7814
Chassis Kits” on page 32 , “BTI7802 Chassis Kits” on page 35 , or “BTI7801 Chassis Kits”
on page 38 .
Lifting and Moving the BTI7814 Chassis
This section describes how to use the optional 14-Slot Chassis Shelf Installation Support
Bracket Kit (BT8A78SSB1) to lift and move the BTI7814 chassis to the rack for installation.
This Shelf Installation Support Bracket Kit can be used for EIA, Weco and ETSI frame
types—19 inches, 21 inches, and 23 inches (482.6 mm, 533.4 mm, 584.2 mm).
Description Component
Used to assist in lifting the chassis. Recommended to be used only to position the
chassis in the lower rack position. Lift handles
Used to support the chassis during installation. Support frame
Used to attach the support frame to the rack. Brackets
Used to secure the brackets to the support frame. Two packets of nuts and bolts
Copyright © 2019, Juniper Networks, Inc. 70
BTI7800 Series Hardware Overview and Installation Guide