JUNIOR JONES J-DUO, Инструкция по эксплуатации

Страница: 11 / 15

J-DUO Instruction Manual
J-DUO Instruction Manual
30 31
Always fit the upper carrycot in the parent-facing position. The carrycot
hood has an intermediate position (45 degrees) to allow viewing when
the carrycot is used in the tandem mode, lower position.
To remove the tandem carrycots, depress the buttons on the side of
the carrycots and lift upwards from the chassis (fig. 43).
Fitting and removing the tandem car seat adaptors (fig. 44):
Fit the lower car seat adaptors (curved) to the lower position until they
click into place (fig. 45).
Fit the upper car seat adaptors (straight) to the upper position until they
click into place.
The adaptors are marked L for left and R for right as viewed from
behind the handle looking forward.
WARNING
: ensure the adaptors are engaged before use by
pulling them upwards.
To remove the tandem car seat adaptors, depress the black buttons on
the car seat adaptors and lift off the chassis (fig. 46).
Fitting and removing the tandem car seats:
Lower the car seats onto the adaptors and press down firmly until the
car seats clicks into place (fig. 47).
Fitting and removing the tandem seat units:
Fit the lower seat unit adapter cups (fig. 39) on to the seat legs (left and
right). With the chassis handle fully extended, lower the seat unit into
the tandem adaptors until it locks into place with a click (fig. 40).
The adapter cups are only for use with the tandem seat in the lower
position.
Always fit the lower seat first in the forward-facing position. The lower
seat unit has a two-position recline only. Do not try to force the seat
into the 3rd recline position. Always fit the upper seat unit in the
forward-facing position.
To remove the tandem seat units, depress the black buttons on the
side of the seat unit and lift the seat upwards from the chassis (fig. 41).
Remove the adapter cups.
Fitting and removing the tandem carrycots:
Holding the lower carrycot by the carry handle, guide the carrycot in
horizontally footend first until the fittings on the carrycot line up with
the fittings on the tandem adapter. Push the carrycot into the tandem
adapter until it locks into place with a click. Fit the upper carrycot into
the upper position by lowering it into the tandem adapter until it too
locks into position with a click (fig. 42).
Always fit the lower carrycot first in the forward-facing position.