JUNIOR JONES J-DUO, Инструкция по эксплуатации

Страница: 10 / 15

J-DUO Instruction Manual
J-DUO Instruction Manual
28 29
17. Using the J-DUO with a Group 0+ Car Seat
To fit the car seat adaptors, insert the car seat adaptors onto the left
and right sides of the main chassis housings (fig. 32).
The adaptors are marked L for left and R for right from the perspective
of standing behind the handle of the chassis. Press down firmly until
they click into place.
WARNING
: ensure the adaptors are engaged before use by
pulling them upwards.
To fit the car seat parent-facing mode only, align the car seat with the
adaptors and press down firmly until the car seat clicks into place (fig. 33).
WARNING
: ensure the car seat is locked into place by gently
pulling the car seat upwards.
Remove the car seat by depressing the buttons on either side of the
car seat and lift off the adaptors (fig. 34).
To remove the car seat adaptors depress the buttons on the adaptors
and lift off the chassis (fig. 35).
WARNING
: only use car seats which have been approved by
JUNIORJONES.
CAUTION: always remove the car seat adaptors before folding the chassis
For car seats used in conjunction with a chassis, this vehicle does not
replace a cot or a bed. Should your child need to sleep, then it should
be placed in a suitable stroller body, cot or bed.
The J-DUO has been designed and tested for use with a number of
leading car seat brands, for full details please visit the Support section
of our website; www.juniorjones.com or check with your local
experience centre.
18. Using the J-DUO in tandem mode
IMPORTANT: maximum occupancy as a tandem vehicle should be used
only for two children.
Fitting and removing the tandem adaptors:
Insert the tandem adaptors (fig. 36) onto the left and right sides of the
main chassis housings until it locks into place with a click (fig. 37).
Ensure the locating hook is aligned with the locating pin on the outside
of the rear lower leg.
WARNING
: ensure the adaptors are engaged before use by
pulling them upwards.
To remove the tandem adaptors, depress the black buttons, unhook the
lower section from the rear leg and remove from the chassis (fig. 38).