JUNIOR JONES J-DUO, Инструкция по эксплуатации

Страница: 6 / 15

J-DUO Instruction Manual
J-DUO Instruction Manual
20 21
1. Fitting/removing the front wheels
To fit, press the quick release button on the back of the wheel housing
on the chassis and push the front wheel onto axle (fig. 1).
The wheels are marked L for left and R for right from the perspective of
standing in front of the chassis.
IMPORTANT: check the wheels are secure by pulling downwards.
To remove, press the quick release button on the back of the wheel
housing on the chassis and pull the wheel away from the axle.
2. Fitting/removing the rear wheels
To fit, press the button in the centre of the rear wheel and push onto
the rear wheel housing (fig. 2).
IMPORTANT: check the wheels are secure by pulling outwards.
To remove, press the button in the centre of the rear wheel and pull the
wheel away from the wheel housing (fig. 2).
3. Unfolding the J-DUO chassis
Ensure the chassis is stood upright. Release the travel lock on the
bottom (fig. 3) of the chassis. If the locks are stiff, pull the chassis
together to allow release.
Allow the front of the chassis to move forwards. You may have to pull
forward gently to assist this (fig. 4).
Release the travel lock (fig. 3) and then lift the handle upwards until
you hear the lock engage with a click (fig. 5).
WARNING:
ensure the locking devices are engaged before use.
4. Operating the parking brake
Press down on the pedal to engage the parking brake. Press down and
release to disengage the parking brake (fig. 6).
WARNING:
never leave the vehicle without first fully engaging
the parking brake.
5. Operating the front swivel wheels
Press the button until it clicks to switch between fixed or swivel wheel
travel (fig. 7).
6. Adjusting the handle height
Rotate the central section of the handle forward and slide into the
desired position (fig. 8). The handle has 5 height positions.