T-27 Tucano 20cc 1.2 2022
52
To lock the canopy / frame assembly in the closed position on the fuselage, use a piece of horn or servo arm
with a hole to be fixed on the canopy frame and a spring-loaded lock as shown in the photos below. You can
take advantage of the location of the replica of the canopy opening lever (see photos below). Make a slot to
allow the lever to pass outside the fuselage and fix the lock on the inside with 30 to 40 minutes epoxy glue,
considering the position of the horn or servo arm so that the closing is very tight and secure.
Above: lock position of the canopy / frame assembly on the fuselage.
Above: locking the canopy assembly / canopy frame inside the fuselage..
Pitot tubes replicas
The two pitot tubes replicas must be glued with 5 minutes epoxy glue to the bottom of the wing at the
locations outlined with the shape of the base, 1 on the right and 1 on the left, with the tip of the tube
facing
forward.
