T-27 Tucano 20cc 1.2 2022
51
To make the canopy / frame set with side opening there are 2 hinge options: internal or external. The opening
is made from left to right, so the hinges must be attached to the right side of the fuselage. With internal hinges,
2 door/compartments hinges are used. We recommend ROBART (ROBQ 350). The attachment locations of the
hinges on the canopy frame must be on the same line to allow opening and closing without friction or
deformation (see photos below). Make a simulation of opening and closing before fixing the hinges
permanently. If necessary (depending on the hinges used) make slots on the fuselage edge to allow full
movement of the hinges during the opening and closing of the canopy. It is very important that the hinges are
securely attached to both parts. Apply 30 to 40 minutes epoxy glue and screw the hinges to the frame locking
with self-locking nuts (parlock).
Above: canopy/frame assembly with external Dubro hinges DUB 116.
Above: canopy/frame assembly with internal hinges.
Above: Fixing of the internal hinges for the side opening of the canopy.
