T-27 Tucano 20cc 1.2 2022
27
Above: Location of servo access covers and position of elevator horns.
Before definitively screwing the mini servos, apply a drop of medium CA glue or epoxy to each hole in the
ribs where they will be fixed. To screw the mini elevator servos to the inner ribs of the stabilizer, use a short
wrench to keep the screw angle at 90º in relation to the ribs, as there is little internal space. It is necessary to
open a slot on the covers of the servos boxes to pass the mini servos arms as shown in the photos. To fix the
servo box covers apply a drop of medium CA glue or epoxy 5 minutes in each hole for better fixation and
vibration resistance and then screw.
Above: Servo position on stabilizer rib (left) and position of servo arm, horn and elevator command.
The hole in the lower center of the stabilizer is necessary to pass the 2 mini servo extensions that will be
connected to the receiver, connect the extensions to the servos with locks so that they do not come loose.
Above: Servo position on the stabilizer rib (left) and elevator servo extensions passing through the lower
center of the stabilizer (right).
