T-27 Tucano 20cc 1.2 2022
49
The clear canopy is supplied in a thermoformed part. Cut out the canopy in the correct shape with very sharp
scissors, remove the back and front following the embossed reference line. Finish with a fine sandpaper 280 to
320. Sand the inner edges of the canopy without excess sand and at the contact points of the canopy frame
where the canopy will be glued for better adhesion. To glue, use white canopy glue and attach the canopy set
/ canopy frame to the fuselage with good adhesion masking tape, allowing to cure for 12 hours. After curing,
remove the tapes and clean any tape or glue residue. We recommend ZAP Formula 560 (PT-56). Never use CA
glue to glue these parts, as the evaporated gases stain and damage the clear plastic material. Use automotive
wax to clean, remove small scratches and increase transparency of the canopy.
