minerals. If you’re clogged with minerals, it will work. If the nozzle is clogged
with debris, you may want to try to unscrew it and clean the tiny filter or replace
the nozzle tip.
4.
Cannot maintain pressure when misting, water only drips
possible that you're not setup optimally, see notes on good design.
check the ZipDrip valve (if present) if the electrical connections are secure. It's
possible that ZipDrip got disconnected and now allows water to be pumped in a
loop.
5.
Pump is noisy
Key to remember that the all our pumps are very quiet. Most of the noise is
actually coming from the pulsation that the working pump transfers to the tubing
and as it vibrates it's creating the noise hitting various objects. Easy fix is just to
use tubing clips, zip ties, tape to secure the tubing so it is tight with no excess that
is allowed to make noise.
6.
Tubing or fitting is stuck. How do I remove it ?
Once you know how to remove tubing or fittings this becomes easy and trivial. If
you don't know how the push to connect fittings work you may end up damaging
the fitting. Watch a video on how to remove tubing easily
