Version 3:
If your system includes a ZipDrip valve (D), plug the male end of the ZipDrip "T"
into the pump (B) intake. Use a piece of tubing to connect the reservoir bulkhead (A) to the
manual ball valve (C) and then into the other end of the ZipDrip "T" as shown in the photo.
Please note that the output of the pump goes to the misting assemblies, then comes back into
the input of the ZipDrip forming a loop. (
HINT
: ZipDrip valve has a small arrow on the
underside showing flow direction
)
