Jungheinrich ECE 320, Руководство по эксплуатации

Страница: 62 / 87

F 5
0708
.GB
Maintenance Intervals
Standard =
t
W A B C
Cold store =
k
Hydraulic
operation 6.1 Visually inspect rollers, slide pieces and stops.
k t
6.2 Test operation of lift mechanism, check for wear and check
settings.
k t
6.3 Test hydraulic system.
k t
6.4 Check that hose and pipe lines and their connections are
secure, check for leaks and damage, and tighten unions if
necessary.
k t
6.5 Check cylinders and piston rods for damage and leaks, and
make sure they are secure
k t
6.6 Check hydraulic oil level.
k t
6.7 Replace hydraulic oil. (This may have to be performed via
a specialist environmental service truck)
k t
6.8 Check hydraulic oil filter, clean and replace if necessary
k t
6.9 Check the load chain
k t
6.10 Check the scissor lift
k t
Agreed
perfor-
mance
levels 7.1 Lubricate truck in accordance with Lubrication Schedule.
k t
7.2 Test run
t
7.3 Demonstration after servicing
k t
Steering
system 8.1 Test electric steering.
t
F 5
0708
.GB
Maintenance Intervals
Standard =
t
W A B C
Cold store =
k
Hydraulic
operation 6.1 Visually inspect rollers, slide pieces and stops.
k t
6.2 Test operation of lift mechanism, check for wear and check
settings.
k t
6.3 Test hydraulic system.
k t
6.4 Check that hose and pipe lines and their connections are
secure, check for leaks and damage, and tighten unions if
necessary.
k t
6.5 Check cylinders and piston rods for damage and leaks, and
make sure they are secure
k t
6.6 Check hydraulic oil level.
k t
6.7 Replace hydraulic oil. (This may have to be performed via
a specialist environmental service truck)
k t
6.8 Check hydraulic oil filter, clean and replace if necessary
k t
6.9 Check the load chain
k t
6.10 Check the scissor lift
k t
Agreed
perfor-
mance
levels 7.1 Lubricate truck in accordance with Lubrication Schedule.
k t
7.2 Test run
t
7.3 Demonstration after servicing
k t
Steering
system 8.1 Test electric steering.
t