Jungheinrich AM 20T, Руководство по эксплуатации

Страница: 26 / 27

E 3
0708
.GB
5 Decommissioning the industrial truck
If the industrial truck is to be decommissioned for more than two months, e.g. for
operational reasons, it must be parked in a frost-free and dry location and all
necessary measures must be taken before, during and after decommissioning as
described.
M
On decommissioning the truck must be jacked up so that all the wheels are clear of
the ground. This is the only way of ensuring that the wheels and wheel bearings are
not damaged.
If the truck is to be out of service for more than 6 months, further measures must be
taken in consultation with the manufacturer’s service department.
5.1 Prior to decommissioning:
– Thoroughly clean the truck.
– Check hydraulic oil, replenish if necessary
– Apply a thin layer of oil or grease to any non-painted mechanical components.
– Lubricate the links.
5.2 During decommissioning:
– No action required.
5.3 Returning the truck to operation after decommissioning
– Thoroughly clean the truck.
– Lubricate the links.
– Check hydraulic oil for condensed water and replace if necessary.
– Start up the truck (see Chapter C).
E 3
0708
.GB
5 Decommissioning the industrial truck
If the industrial truck is to be decommissioned for more than two months, e.g. for
operational reasons, it must be parked in a frost-free and dry location and all
necessary measures must be taken before, during and after decommissioning as
described.
M
On decommissioning the truck must be jacked up so that all the wheels are clear of
the ground. This is the only way of ensuring that the wheels and wheel bearings are
not damaged.
If the truck is to be out of service for more than 6 months, further measures must be
taken in consultation with the manufacturer’s service department.
5.1 Prior to decommissioning:
– Thoroughly clean the truck.
– Check hydraulic oil, replenish if necessary
– Apply a thin layer of oil or grease to any non-painted mechanical components.
– Lubricate the links.
5.2 During decommissioning:
– No action required.
5.3 Returning the truck to operation after decommissioning
– Thoroughly clean the truck.
– Lubricate the links.
– Check hydraulic oil for condensed water and replace if necessary.
– Start up the truck (see Chapter C).