Jungheinrich AM 20T, Руководство по эксплуатации

Страница: 16 / 27

C 3
0107
.GB
1.3 Assembling the Hand Pallet Truck
– Place the fork (7) on a level surface.
– Open both retaining straps (1).
– Pull down on the “Lift/lower forks”
handle (lowered position).
– Place the tiller (4) at an angle with the
ball head (9) under the receptacle (8)
of the fork.
– Set the tiller upright while ensuring
that the centring pivots (5) grasp the
bearings (6) of the link.
– Close the retaining straps (1) on both
sides.
Z
Always discharge the truck after
assembly.
– Pump up the forks fully.
– Set the tiller (4) to the horizontal
position and fully lower the forks.
– Set the tiller upright again.
7
9
4
5
8
6
1
4
C 3
0107
.GB
1.3 Assembling the Hand Pallet Truck
– Place the fork (7) on a level surface.
– Open both retaining straps (1).
– Pull down on the “Lift/lower forks”
handle (lowered position).
– Place the tiller (4) at an angle with the
ball head (9) under the receptacle (8)
of the fork.
– Set the tiller upright while ensuring
that the centring pivots (5) grasp the
bearings (6) of the link.
– Close the retaining straps (1) on both
sides.
Z
Always discharge the truck after
assembly.
– Pump up the forks fully.
– Set the tiller (4) to the horizontal
position and fully lower the forks.
– Set the tiller upright again.
7
9
4
5
8
6
1
4