Jungheinrich AM 20T, Руководство по эксплуатации

Страница: 24 / 27

E 1
0708
.GB
E Industrial Truck Maintenance
1 Operational safety and environmental protection
The checks and servicing operations contained in this chapter must be performed in
accordance with the intervals indicated.
F
Any modifications to the industrial truck assemblies, in particular the safety
mechanisms, is prohibited. The operational speeds of the truck must not be changed
under any circumstances.
M
Only original spare parts have been certified by our quality assurance department. To
ensure safe and reliable operation of the truck, use only the manufacturer's spare
parts. Used parts, oils and fuels must be disposed of in accordance with the relevant
environmental protection regulations. For oil changes, contact the manufacturer’s
specialist department.
Upon completion of checks and servicing, follow the instructions contained in the
“Recommissioning” section.
2 Maintenance Safety Regulations
Maintenance personnel: Industrial trucks must only be serviced and maintained by
the manufacturer’s trained personnel. The manufacturer’s service department has
field technicians specially trained for these tasks. We therefore recommend a
maintenance contract with the manufacturer’s local service centre.
Lifting and jacking up: When an industrial truck is to be lifted, the lifting gear must
only be secured to the points specially provided for this purpose. When jacking up the
truck, take appropriate measures to prevent the truck from slipping or tipping over
(e.g. wedges, wooden blocks).
Cleaning operations: Do not use flammable liquids to clean the industrial truck. Prior
to cleaning, implement all necessary safety measures to prevent sparking.
M
Do not clean with pressurised water.
On completion of the cleaning work, carry out the activities detailed in the
“Recommissioning” section.
Settings: Always note the truck-specific settings when carrying out repairs or
replacing hydraulic components.
Tyres: The quality of tyres affects the stability and performance of the truck. Always
used original spare parts when replacing factory fitted wheels. Otherwise the
performance of the truck cannot be guaranteed.
When replacing wheels, ensure that the truck does not slew (e.g. always replace left
and right wheels at the same time).
Hydraulic hoses: The hoses must be replaced every six years. When replacing
hydraulic components, also replace the hoses in the hydraulic system.
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
E 1
0708
.GB
E Industrial Truck Maintenance
1 Operational safety and environmental protection
The checks and servicing operations contained in this chapter must be performed in
accordance with the intervals indicated.
F
Any modifications to the industrial truck assemblies, in particular the safety
mechanisms, is prohibited. The operational speeds of the truck must not be changed
under any circumstances.
M
Only original spare parts have been certified by our quality assurance department. To
ensure safe and reliable operation of the truck, use only the manufacturer's spare
parts. Used parts, oils and fuels must be disposed of in accordance with the relevant
environmental protection regulations. For oil changes, contact the manufacturer’s
specialist department.
Upon completion of checks and servicing, follow the instructions contained in the
“Recommissioning” section.
2 Maintenance Safety Regulations
Maintenance personnel: Industrial trucks must only be serviced and maintained by
the manufacturer’s trained personnel. The manufacturer’s service department has
field technicians specially trained for these tasks. We therefore recommend a
maintenance contract with the manufacturer’s local service centre.
Lifting and jacking up: When an industrial truck is to be lifted, the lifting gear must
only be secured to the points specially provided for this purpose. When jacking up the
truck, take appropriate measures to prevent the truck from slipping or tipping over
(e.g. wedges, wooden blocks).
Cleaning operations: Do not use flammable liquids to clean the industrial truck. Prior
to cleaning, implement all necessary safety measures to prevent sparking.
M
Do not clean with pressurised water.
On completion of the cleaning work, carry out the activities detailed in the
“Recommissioning” section.
Settings: Always note the truck-specific settings when carrying out repairs or
replacing hydraulic components.
Tyres: The quality of tyres affects the stability and performance of the truck. Always
used original spare parts when replacing factory fitted wheels. Otherwise the
performance of the truck cannot be guaranteed.
When replacing wheels, ensure that the truck does not slew (e.g. always replace left
and right wheels at the same time).
Hydraulic hoses: The hoses must be replaced every six years. When replacing
hydraulic components, also replace the hoses in the hydraulic system.
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe