5
INSTALLATION
The digital filter processor e07 was carefully packed in the
factory and the packaging was designed to protect the
equipment from rough handling. Please examine carefully the
packaging and its contents for any signs of physical damage,
which may have occured in transit.
The digital filter processor e07 is manufactured under the safety
category
Schutzklasse 1
in keeping with the VDE 0804
standards.
Check the voltage details printed at the rear panel are the same
as your local mains electricity supply.
The digital filter processor e07 is equipped with standard
connectors (see chapter 3).
Before connecting the digital filter processor e07 switch the
power off at all connected units.
The digital filter processor e07 is made as standard 19“ unit (EIA
format). It occupies 1 RU (44 mm height) space in a rack.
Please allow at least addititonal 3“ depth for the connectors on
the rear panel.
When installing the unit in a 19“ rack the rear side of the unit
needs some support, especially for mounting in flight cases.
The filter processor should not be installed near units which
produce strong magnetic fields or extreme heat. Do not install
the filter processor directly above or below power amplifiers.
If, during operation, the sound is interrupted or displays no
longer illuminate, or if abnormal odor or smoke is detected
immediately disconnect the power cord plug and contact your
dealer or Jünger Audio.
2.1
UNPACK THE UNIT
2.2
POWER SUPPLY
2.3
CONNECTIONS
2.4
RACK MOUNTING
2.5
OPERATION
SAFETY
2
