4. OPERATION
20
new
snapshot selection for editing
(low RANGE)
(only selectable if EDL is not empty)
display:
01 ... 50
selection of snapshot 01 ... 50 for editing
hh
(h-mid FREQ)
Adjustment of hours value
mm
(h-mid WIDTH)
Adjustment of minutes value
ss
(h-mid RANGE)
Adjustment of seconds value
ff
(high FREQ)
Adjustment of frames value
Note: Caused by arrangement of snapshots by time code it is necessary to
create different timecode values for each snapshot, even if EDL is only used
as event list (playback without timecode, see: playback EDL without
timecode)!
To place a new snapshot or to replace an existing snapshot at a
defined position the timecode value is to be set between the timecode
values of snapshot before and snapshot behind.
edit
Recall of filter parameter set for
(l-mid WIDTH)
sound rehearsal
and on-line editing
display:
edit **
and filter parameter set
[** snapshot no.]
readjustment of filter parameter like described in 4.1 - 4.3
MODE
Saving of edited filter parameter and
return to SNAPSHOT EDIT MENU
ENTER
Saving the edited snapshot and return to
(low FREQ)
SNAPSHOT MENU
display:
snapshot
SNAPSHOT MENU
or
del
(high RANGE)
Deleting the selected snapshot and return to
SNAPSHOT MENU
display:
snapshot
SNAPSHOT MENU
or
MODE
Return to SNAPSHOT MENU without
saving
display:
snapshot
SNAPSHOT MENU
to escape snapshot menu
MODE
Selection of working mode
EDITING OF
TIMECODE
PARAMETER
DEFINED
PLACEMENT AND
INSERTION OF
SNAPSHOTS
RECALL AND
EDITING OF FILTER
PARAMETER
SAVING EDITED
SNAPSHOT
DELETING OF
SNAPSHOTS
pus h
pus h
pus h
pus h
turn
pus h
pus h
turn
