4. OPERATION
21
MODE
Selection of MAINMENU
SNAP SHOT
Selection of SNAPSHOT MENU
edit
Selection of EDIT MODE
display:
SNAPSHOT etr new
hh:mm:ss:FF
new
snapshot selection for copy
(low RANGE)
(only selectable if EDL is not empty)
display:
01 ... 50
for selected snapshot
edit
loading filter parameter set of selected
snapshot as active parameter set for
sound rehearsal and for copy
display:
edit
<snapshot no> <filter parameter>
MODE
Selection of SNAPSHOT EDIT MENU
01..50
Selection of NEW snapshot, turn knob until
(low RANGE)
new
is displayed
display:
SNAPSHOT new hh:mm:ss:FF
hh
(h-mid FREQ)
Selection of hours value
mm
(h-mid WIDTH)
Selection of minutes value
ss
(h-mid RANGE)
Selection of seconds value
ff
(high FREQ)
Selection of frames value
Note: Caused by arrangement of snapshots by time code it is necessary to
create different timecode values for each snapshot, even if EDL is only used
as event list (playback without timecode, see: playback EDL without
timecode)!
To place a new snapshot or to replace an existing snapshot at a defined
position the timecode value is to be set between the timecode values of
snapshot before and snapshot behind.
ETR
Saving loaded filter parameter and
timecode
(low FREQ)
as new snapshot
display:
edit **
and filter parameter set
[** snapshot no.]
MODE
Return to SNAPSHOT EDIT MENU
more editing or
MODE
Return to SNAPSHOT MENU
COPYING
SNAPSHOTS BY
EDIT MODE
RECALL OF FILTER
PARAMETER
EDITING OF
TIMECODE
PARAMETER
DEFINED
PLACEMENT AND
INSERTION OF
SNAPSHOTS (COPY)
pus h
pus h
turn
pus h
pus h
pus h
pus h
pus h
turn
turn
pus h
