Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
1 Product definition
1.1 Product catalogue
Product name: Standard push-button module, 1-gang / Standard push-button module, 2-gang
/ Standard push-button module, 3-gang / Standard push-button module, 4-
gang
Use:
Sensor
Design:
FM (flush-mounted)
Art. No.
5071 TSM / 5072 TSM / 5073 TSM / 5074 TSM
1.2 Function
Push button functions
When its buttons are pushed, the standard pushbutton sensor modules send telegrams to the
KNX, depending on the ETS parameter settings. These can be, for instance, telegrams for
switching or push button control, for dimming or for controlling blinds. It is also possible to
program 1-byte value transmitter functions (e.g. dimming value transmitters).
The pushbutton sensor modules consist of several control surfaces. The operation concept can
be configured in the ETS either as a rocker function or alternatively as a push button function
(only "Switching" function). With the rocker function, two neighbouring control surfaces are
combined into one rocker switch. In the pushbutton function, each control surface is evaluated
as single-surface operation.
LED functions
The Standard push-button modules have one red status LED for each rocker switch. The status
LEDs can be switched on or off permanently, or can function as a status indicator. As an
alternative, with the aid of separate communication objects, they can signal widely varying
display information completely independently of the push-button function, e.g. operation states
of lighting systems or room temperature controllers.
An operation LED can optionally serve as an orientation light. The colour of the operation LED
can be configured in the ETS (red, green, blue). In programming operating mode, the operation
LED flashes permanently with a frequency of approx. 8 Hz.
Energy saving mode
The device has an energy saving mode to save electrical energy during operation. If the
function is used, the device switches to the energy saving mode after a preset time without
operation or controlled by an external telegram to a separate object, and switches off the
signalling function of the device. The energy saving mode can be deactivated by an operation or
by a special telegram. Afterwards, the device is fully functional again.
Bus coupling unit
The pushbutton sensor modules contain a bus coupling unit and thus can be connected directly
to the bus line.
Page 3 of 39
Product definition
