Mounting a weather station with a fastening arm on a mast or wall
Figure
7
: Mounting with fastening arm
Mount enclosed fastening arm onto a suitable mast or wall.
The enclosed hose clamps are suitable for a maximum mast diameter of up to 2.36 in (60 mm).
i
When mounting on the supplied fastening arm, do not mount the enclosed guide blade.
o
Mast mounting: Attach the fastening arm to the mounting mast using the enclosed hose
clamps.
o
Wall mounting: Attach the fastening arm to the wall through the boreholes using three suit
able screws.
o
Route the connecting cable along the underside of the fastening arm and guide the 7pin
plug through the open pipe socket at the end of the fastening arm.
o
Fit the cable ties for strain relief (14).
o
Attach the 7pin plug to the connection (7). Tighten the threaded ring with max.
0.37 lbf.ft (0.5 Nm).
o
Mount the weather station on the fastening arm and align it. The grub screw must be point
ing north.
o
Tighten the grub screw with max. 0.44 lbf.ft (0.6 Nm).
o
Route the connecting cable through the cable bushing (15) into an installation pipe.
6/10
Universal weather station
82590115
J0082590115
07.11.2017
