Figure
4
: Avoid spray water
Figure
5
: Maximum load on the fastening arm
Select a mounting location in which the weather station is not influenced by local obstacles or
shading, such as surrounding trees, chimneys, awnings, etc. The sensor must be able to detect
wind, rain, and ambient brightness without impedance. Avoid slipstream, shadow casting, and
light reflection.
Preferred mounting on a freestanding mast. If the device is mounted on house walls, the mea
surement of wind and brightness in particular can be distorted.
Do not mount it below or next to building sections from which water can drip onto the device.
Select the mounting location so that the weather station will be accessible.
In the case of flat roofs, locate the weather station as close to the center of the roof as possible.
Minimum distance to surfaces below the weather station: 1.97 ft (0.6 m)(figure
3
). Otherwise,
the sensors on the underside may be damaged by penetrating spray water (figure
4
).
Direct sunlight, chimneys, or other waste gas or ventilation systems affect the temperature mea
surement.
Do not operate in the vicinity of radio transmitter systems. Doing so will compromise the func
tion.
i
Do not connect more than 3 weather stations in a KNX line.
4/10
Universal weather station
82590115
J0082590115
07.11.2017
