Jung FRWM-IP-GATE, Руководство по эксплуатации

Страница: 26 / 54

26
Operating Manual: FRWM-IP-GATE - IP-Gateway EN
5
The learning mode is active for
10 minutes, the signal LEDs on all
installed members of the radio
group are flashing.
(2) Adding additional smoke alarm
devices.
f
Remove splint pin on the red acti-
vation button of the smoke alarm
device.
f
Press the activation button so that
it is flush.
Short acoustic signal
Radio group query:
f
Add further smoke alarm devices
one after another to the radio group.
To do this, press in the activation but-
tons on the respective smoke alarm
devices so that they are flush.
6 Installation variants
6.1 New installation
f
Perform a new installation in accor-
dance with chapter 4.8 “Setting up
the radio group and integrating the
gateway” on page 19.
6.2 Adding a smoke alarm device to
a radio group
(1) Press the radio button (A) on the
gateway or on any of the FRWM
devices until the signal LED lights up
and hold until it goes out, and then
release.
(A)
Starting the learning mode on the
gateway or on one of the smoke
alarm devices:
(A)
(A)
(A)