Jung FRWM-IP-GATE, Руководство по эксплуатации

Страница: 25 / 54

Operating Manual: FRWM-IP-GATE - IP-Gateway
25
EN
5 Reset
(3) Reset network.
f
Press gateway button (B) until a long
acoustic signal is emitted, then release.
(B)
5
Gateway is switched off.
5.2 Smoke alarm device reset
In order to re-create the radio group
after the gateway reset, also reset the
smoke alarm devices.
(1) Pull out activation button.
(2) Press and hold Test/Stop button for
2 to 3 seconds.
Soft ticking for about
2 seconds
(3) Press radio button with splint pin
until it flashes, then release.
5
The device is in its default state.
In some situations you must execute a re-
set to restore the default state, e.g., for new
installation of the radio group after a move.
5.1 Gateway reset
Prior to the reset, the gateway must be
connected to the power supply.
(1) Start reset.
f
Remove the power cable
from the
gateway
.
Cyclic acoustic signal on the
gateway for 30 seconds
(B)
During this time, perform the follow-
ing steps in the sequence specified:
(2) Reset radio module.
f
Press radio button (A) on the gate-
way until it flashes, then release.
(A)
(A)
Signal LED of radio button (A)
"Off"