Jung FRWM-AR, Руководство по эксплуатации

Страница: 15 / 22

Operating manual: FRWM-AR Alarm relay
33
EN EN
7 Restore default status
(1) To set the FRWM-AR into default status,
press and hold the configuration button
for approx. 20 seconds. During these
20 seconds, the LED produces various
optical signals at different intervals:
•
At the start, a continuous
yellow interval signal
•
Then a slowly flashing
yellow interval signal
•
Finally a quickly flashing
yellow interval signal
(2) Now release the button.
(3) The Status-LED lights up green briefly.
5
The device is now in the default
status.
The default status can only be resto-
red if the FRWM-AR is in the status
that was given, when the FRWM-
AR was integrated into the radio
group/during the learning process.
Example: When the FRWM-AR was
integrating and the contacts were
bridged, during the reset, the cont-
acts must also be bridged/the device
must be in the non-alarm status.
20 sec.
1 2 3 4