Jung FRWM-AR, Руководство по эксплуатации

Страница: 11 / 22

Operating manual: FRWM-AR Alarm relay
29
EN EN
4.1 Minimum separation distances
during installation
Maintain an approximately equal distance
between the shared radio group and other
radio groups
f
Install additional equipment, if
required.
f
Keep a minimum distance of 2 m to
electronic, radio-based devices (e.g.,
wireless LAN routers).
f
Keep a minimum distance of 3 m to
radio smoke alarm devices.
4.2 Configuring the alarm input
Before integrating the FRWM-AR into a radio
group, you can define one of the 3 possible
connection variants to the input.
This is stored by the device until it is reset
again. To subsequently change the connecti-
on state, a new installation of the radio group
is required.
3.3 Application example
1. Trigger button
One possible way to use the alarm input
of your FRWM-AR is the use of a manual
push-button alarm. If this button is pressed, it
also activates the FRWM-AR. An alarm is sent
to the radio group and it activates the radio-lin-
ked smoke alarms in the group.
2. Catch system
To use the alarm output of your FRWM-AR,
you could connect this to a catch system,
for example. Catch systems ensure that fire
protection doors or smoke-connections are
kept open but, in the event of a fire or if smoke
builds up, close safely.
If a fire breaks out, the alarm is sound via the
radio alarms and the signal is passed to the
catch system. Then the doors will close.
4 Putting into operation