3 Function
System information
By statute, the transmitting power, the reception characteristics and the antenna cannot be
changed.
The range of a radio system from the transmitter to the receiver depends on various
circumstances.
The range of the system can be optimised by selecting the optimal installation location, taking
into account the structural circumstances.
Figure 2: Reduced range due to structural obstacles
Example of penetration of various materials:
Material
Penetration
Wood, Plaster, Plasterboard
approx. 90%
Brick, Chipboard
approx. 70%
Reinforced concrete
approx. 30%
Metal, Metal grid
approx. 10%
Rain, Snow
approx. 1-40%
Intended use
-
Automatic switching and dimming of lighting depending on heat motions and ambient
brightness
-
Operation in combination with suitable radio actuators from Release R2 onwards
-
Ceiling installation, surface-mounted
Product characteristics
-
The presence detector detects heat motions of people, animals and objects
-
Sensitivity, run-on time and brightness setpoint adjustable
-
Push-on cover for limiting the detection area
-
Constant light regulation with dimmer actuator
-
2-point light control with switch actuator
-
The brightness setpoint can be changed via a separate radio transmitter
-
Switching the lighting on or off for 2 hours can be activated
-
Manual switch-on and switch-off of the light control possible
-
Multiple presence detectors can be combined to form a common system.
-
Battery-powered device
2/14
82536633
J0082536633
16.08.2016
Radio Management
Radio presence detector
