Limiting the detection area
Figure 12: Push-on cover
The push-on cover can be used to limit the detection area, e.g. in order to mask out
interference sources.
Cover size
Detection area on the floor
Complete cover
Ø approx 2.2 m
Area I cut out
Ø approx 4 m
Areas I + II cut out
Ø approx 6 m
Without cover
Ø approx 8 m
All data are applicable for an installation height of 2.5 m
o
Pull off push-on cover
o
Using scissors, cut out push-on cover along the marked lines as required.
o
Push on push-on cover
Presence detector system: teaching master and slave presence detectors
In order to monitor larger areas, multiple presence detectors can be used together in a system.
In the presence detector system one presence detector has to be defined as the main device
(master). All other presence detectors function as extensions (slaves) (figure 13).
i
The number of presence detectors that can be used in a radio installation is limited.
Depending on the environment, the use of more than 8 presence detectors can lead to
degraded functioning.
12/14
82536633
J0082536633
16.08.2016
Radio Management
Radio presence detector
