eNet radio dimming actuator 1-gang mini
Parameters
Setting options, Basic setting
Explanations
dimming principle. Connection
of incandescent lamps, HV
halogen lamps, dimmable in-
ductive transformers for halo-
gen or LED lamps.
Trailing edge phase control
Dimming principle, trailing
edge phase control. Connec-
tion of incandescent lamps,
HV halogen lamps, Tronic
transformers for halogen or
LED lamps.
Behaviour on voltage return
On
Off
Last value
Configured brightness
Basic setting: Off
Defines the behaviour of the
output after voltage return.
Brightness on voltage return
0...100 %
Basic setting: 100 %
Brightness value, set by the
output after voltage return
(mains voltage). (Only visible
when the parameter "Beha-
viour on voltage return" is set
to "Configured brightness")
Note: If the value is above the
set maximum brightness or
below the minimum bright-
ness, then the system will
switch to the appropriate limit
value.
Behaviour after the end of the
disabling function
On
Off
no change
Last value
Basic setting: No change
Behaviour of the output when
a block is removed.
Manual saving of the scene
values
On, Off
Basic setting: On
Disables the saving of the cur-
rent brightness value as scene
value in an actuator for a com-
mand via a transmitter.
Switch-off warning
On, Off
Basic setting: Off
If the switch-off warning is act-
ive, then, during switch-off, the
system dims to minimum
brightness within 30 seconds
and only then switches off. If
the parameter "Dim down
ramp" is configured as longer
than 30 s, then the length of
the dim down ramp is applied.
If, during the dim down opera-
tion, another command is
given, e.g. switch on or scene
recall, then the switch-off
warning stops and the com-
mand is executed. A switch-off
11 / 16
82580733
14.10.2019
J0082580733
