LB management
Motion and presence detector
Limiting the detection field using the push-on cover
The push-on cover can be used to limit the detection field, e.g. in order to mask out interference
sources.
Figure 5: Push-on cover
Size
Range on the ground (mounting height 3 m)
Complete push-on cover
Ø approx. 4.5 m
Area I cut out
Ø approx. 7.5 m
Areas I + II cut out
Ø approx. 12 m
without push-on cover
Ø approx. 20 m
￭
Pull off push-on cover.
￭
Using scissors, cut out push-on cover along the marked lines as required.
￭
Push on push-on cover.
Alternatively, the detection field can also be limited via the app by reducing the sensitivity
or switching off individual sensors.
Expanding the detection field
To expand the detection field, connect a 3-wire extension with presence or motion detector
cover. The main device also evaluates signals of the extension and, if necessary, switches the
lighting on.
Configuring device settings
Settings are configured via the app
Default settings
Function
Setting
Operating mode
Motion detector
Operating function
Automatic operation
7 / 13
82599323
25.10.2019
J0082599323
