LB management
Motion and presence detector
(7)
Push-on cover
Status LED
Red LED lights up
Self-test
Red LED flashes 3 s on / 3 s off
Alarm function active
Red LED flashes 0.5 s on / 0.5 s off
Alarm was triggered
Red LED flashes three times followed by a 1 s
pause
Cover was previously connected to another in-
sert
Yellow LED lights up
"Off" or "Off for 0.5 - 5 hours" function active
Yellow LED flashes
Presence simulation active
Green LED lights up
"On" or "On for 0.5 - 5 hours" function active
Blue LED lights up
Device is coupled with a mobile end device
and active app
Blue LED flashes 0.5 s on / 0.5 s off
Bluetooth coupling mode active
3
Intended use
–
Automatic switching of lighting depending on the heat motion and ambient brightness
–
Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB
management
–
Ceiling installation on flush-mounted insert.
Product characteristics
Functions directly on the cover
–
Extension of the detection area in combination with 3-wire extension
–
Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button
–
Dimming light via extension with dimming insert
–
Resetting to factory setting
–
Push-on cover for limiting the detection field
Functions via app
–
Setting the device as presence detector or motion detector
–
Setting the switch-on threshold
–
Separate adjustment of the sensitivity of the three PIR sensors
–
Setting the run-on time
–
On or off
–
On or off for 0.5 - 5 hours
–
Switch-off warning
–
Dynamic run-on time
–
Presence simulation
–
Alarm function
–
Timer function
–
Walking test
In combination with a switch insert
–
Pulse operation
In combination with a dimming insert
–
Switch on with last saved brightness or saved switch-on brightness
–
Adjusting the minimum brightness
–
Adjusting the maximum brightness
–
Hotel function
2 / 13
82599323
25.10.2019
J0082599323
