Page 15 of 49
20320 1S IPS R
Configuration
Advanced settings standard tunnel preferred IP
For standard tunnel connections (before 2019) it is possible to assign each of these tunnel connections to
an IP address. In the analysis of group telegrams, this makes it easier to assign the telegrams to the sender
which „sits“ behind the tunnel, as e.g. Visualizations or smartphone apps.
i
This assignment can be resolved at any time by the ETS or a new so-called extended tunnel connection
(as of 2019).
Fig. 10: Preferred IP for Tunnelling
Function
Options
Description
Slow connection
off
/on
The tunnel connections over UDP are controlled
by default with a connection timeout of
1 second. This may be too short for connections
over the Internet.
UDP connection timeout
1.0 ... 8.0 sec
Setting of timeout for tunnel connection over
UDP
Preferred IP for tunnel X
off
/on
Tunnel X should preferably be used for
communication with the parametrized IP
address.
End device IP
(IP-V4 address)
IP address of end device
