Presetting the short time operation
In conjunction with a switching insert, short-time operation can be set, e.g. to control an
acoustic signal encoder. Short-time operation operates independently of the brightness.
o
Remove slide switch (4).
o
Set the run-on time adjuster (8) to the
M
symbol, short-time operation.
o
Snap on slide switch.
If motion is detected, the motion detector switches on for approx. 0.5 seconds. If further
movement is detected, the switch-on will take place again after an immunity period of
3 seconds.
i
No short-time operation is possible with the dimmer inserts.
6 Information for electrically skilled persons
6.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Selecting the installation location
picture 8: Detection area dependent on the direction of movement
i
Observe the direction of movement: A distinction is made between Approach A and
Transverse B (picture 8). Motions that are transverse to the motion detector can be
detected more better than motions towards or away from the motion detector.
8/14
32540233
J:0082540233
26.07.2010
Light Management
Automatic switch 180° 1.10 m
